Dry Tooling 5 Small Hedron Steep Wall Feet

$35.95

For advanced Drytoolers.

Wall Type * Wall Type determines the required bolt length needed to pass through the hold and the climbing wall. If you are not purchasing hardware, this option doesn't matter.
Hardware *
Single Hold Colors * SEE COLOR CHART

Overview

WALL ANGLE: Useful on vertical walls to 40-degree overhanging walls.
SIZE: The average hold measures 2" wide x 2" tall x 3/4" standing off the wall.
DURABILITY: A custom mix of fine-grain crushed stone and polyurethane resin to resemble the hardness of natural limestone rock. The result is a "hard" resin surface that tolerates the sharpness of ice-climbing axes.
DISCLAIMER: Use Drytooling resin holds only with your picks, not your crampons. This product does wear.
RESPONSIBILITY: Please be aware that it is unacceptable to drytool at your local crag. Drytooling damages natural rock. You should drytool only in places where the local community has dedicated the area and never on established rock climbing routes.
DRY TOOLING ETHICS: What You Should Know before heading out.

Description:

This set offers super technical and tiny placements that will test even the most advanced climbers. For an easier set that appeals to the intermediate-advanced Drytooler, check out the 12 Medium Hedron Crimps.

Including this set in the Backplate category is a stretch, as there is only 1/8" to 1/4" of room above each crystal.

Product tags