Dry Tooling 5 XL Variety Patina

$128.02

Shallow pocket, deep pocket, edge, incut edge, and jugs make up this set.

Wall Type * Wall Type determines the required bolt length needed to pass through the hold and the climbing wall. If you are not purchasing hardware, this option doesn't matter.
Hardware *
Single Hold Colors * SEE COLOR CHART

Overview

WALL ANGLE: Useful on vertical walls to 45-degree overhanging walls.
SIZE: The smallest hold measures 4-3/8" wide x 3-5/8" tall x 2-1/4" off the wall.
SIZE: The largest hold measures 5-3/4" wide x 3-1/2" tall x 2-1/4" off the wall.
DURABILITY: A custom mix of fine-grain crushed stone and polyurethane resin to resemble the hardness of natural limestone rock. The result is a "hard" resin surface that tolerates the sharpness of ice-climbing axes.
DISCLAIMER: Use Drytooling resin holds only with your picks, not your crampons. This product does wear.
RESPONSIBILITY: Please be aware that it is unacceptable to drytool at your local crag. Drytooling damages natural rock. You should drytool only in places where the local community has dedicated the area and never on established rock climbing routes.
DRY TOOLING ETHICS: What You Should Know before heading out.

Description:

The Dry Tooling 5 XL Patina has a heavily pitted design style, so the climber is offered hundreds of locations to hook on. The organic rock-like design offers many options for cool pick placement. They can be used on vertical walls through to 45-degree walls.

This set has many dishes with dimples in them. They are of various sizes ranging from 1/4" to 1/2" in diameter.

We also offer a smaller size set as 5 Medium Patina and the full 10 Pack Patina.

Dry Tooling 5 XL Variety Patina

Overview

Dry Tooling 5 Medium Variety Patina

Dry Tooling 10 Patina