Suited for steep and low angle terrain.
*

Wall Type determines the required bolt length needed to pass through the hold and the climbing wall. If you are not purchasing hardware, this option doesn't matter.

*
*
*

Overview

**Color Tip** Our volumes are made from polyurethane, ensuring indoor and outdoor durability. When selecting a color, we recommend a neutral shade to help the product blend seamlessly with your wall. Choosing a brighter color will draw attention to these larger pieces on your wall.

The Hedron volume offers you a sloper crystal and five t-nut locations. The crystal could be considered a beginner sloper on vertical walls, but where this volume shines is in steeper terrain. The sloper feels in the V3 range on a 25-degree wall and V5 on a 45-degree wall. 

The t-nut locations offer 2-1/2" x 2-1/2", and the area directly below the sloper is 3' x 3". You can set small footholds and crimps on these areas, so in steep terrain, getting a hold on the vertical plane adds a dimensional climbing experience for the holds on your boulder problems. 

  • Base Dimensions : 5" x 4 1/2" x 5 1/4" x 4 1/2" x 5" x 10 3/4"
  • Stands out from the wall: 3-5/8" 
  • T-nuts installed: 5 round base brad hole t-nuts  
  • Attachment method: One single 3/8-16 Allan head bolt and four screws. 
  • Please do not drill spinner screw holes or any other holes into Polyurethane Volumes. You can weaken the structural integrity of the product. This practice also voids our warranty.