T-nut INDUSTRIAL Prismatic Base (Zinc)

Overview

The Prismatic Industrial T-nut is one of the most robust and widely used T-nuts on the climbing market. This model is nice for getting the t-nuts close to the edges of your wall studs. 

Drill 1/2" holes and attach with included screws. 

• 3/8-16 zinc prismatic base t-nut
• Self-guided barrel
• 22% stronger than traditional T-nuts. 1824 pounds of force required to pull the T-nut through a 3/4" ACX plywood panel. 
• The base measures 1-3/8", considerably larger than the industry standard.
• The barrel height measures 9/16".
• Attaches using #6 x 5/8" flat head screws, which are included
• 1/32" thicker barrel wall when compared to the standard version. 
• Great for roofs, locations close-to-wall studs, and areas of your wall where high-leverage products are being used, such as our famous Ninja Warrior Products.  
• Install by drilling a 1/2" hole from the front of the panel to the back, then attach it to the backside of your panel using the included screws.
• Passes EN 12572-1:2017 test in 18MM baltic birch plywood using the test protocol up to 12 kN. 

Click here to read about ZINC VERSUS STAINLESS STEEL.

Click here for T-NUT LAYOUTS.