Volume #7

$101.26

Large surface area triangle suited for all angles.

Wall Type * Wall Type determines the required bolt length needed to pass through the hold and the climbing wall. If you are not purchasing hardware, this option doesn't matter.

Hardware *

Single Hold Colors * SEE COLOR CHART

T-Nut Type *

US Standard 3/8-16
Stainless Steel 3/8-16 T-nut [+$3.56]
Metric 10mm [+$0.60]

Overview

Volume Climbing Hold #7 Large enough surface area to bolt large holds on to it.

Base Dimensions : 11 1/2" x 12" x 11 1/2"

Stands out from the wall: 4 1/2"

T-nuts installed: 3 round base brad hole t-nuts.

Attachment method: One single 3/8-16 Allan head bolt and/or 3 #8/#10 screws.

This large climbing wall hold is an approved copy of Motavation's Willy volume.

Please do not drill spinner screw holes or any other holes into Polyurethane Volumes. You can weaken the structural integrity of the product. This practice also voids our warranty.
If you want to stop a hold from spinning, try double-sided tape or removable glue dots.